Irattach can also use one of the Linux FIR drivers (including USB dongle drivers) instead However, USB dongles and a few FIR hardware don't support serialĮmulation and can't be used with the irtty driver. Operation will work with most FIR hardware (as found in laptops - they provide serialĮmulation) and most serial dongles (provided the proper dongle type is specified), making This works well for most machines andĬonfigurations, but limits the baud rate to 115200bps (IrDA SIR mode). Irattach by default uses the irtty driver which connects to the Linux TTY subsystem and Ports can be activated through multiple irattach commands. Hardware, and configures the IrDA stack to operate on the new IrDA port. The irattach command loads the necessary Linux-IrDA driver, which configures the IrDA This step is usually necessary before you (orĪpplications) can use the higher layer of the IrDA stack. SYNOPSIS irattach ĭESCRIPTION irattach binds the Linux-IrDA stack to an IrDA port. Irattach - binds the Linux-IrDA stack to a IrDA port
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
December 2022
Categories |